The Benefits of Using Vag 908 USB Driver 64 183 for Your VAG-COM Diagnostic System[^2^]
How to Install Vag 908 USB Driver 64 183 on Windows 10: A Step-by-Step Guide
If you are looking for a way to connect your VAG-COM interface to your Windows 10 computer, you may need to install the Vag 908 USB Driver 64 183. This driver allows you to use a virtual COM port to communicate with your interface and perform diagnostic tasks on your vehicle. In this article, we will show you how to install the Vag 908 USB Driver 64 183 on Windows 10 in a few easy steps.
Vag 908 USB Driver 64 183
What is Vag 908 USB Driver 64 183?
Vag 908 USB Driver 64 183 is a driver that emulates a serial COM port for Ross-Tech USB interfaces. These interfaces include HEX-USB, KII-USB and HEX-USB+CAN. These interfaces are used to connect to VAG-COM software, which is a diagnostic system for Volkswagen, Audi, Seat and Skoda vehicles. VAG-COM software allows you to read and clear fault codes, view live data, perform basic settings, coding and adaptation, and more.
However, the USB drivers that ship with VAG-COM do not emulate a serial COM port and cannot be used with applications that expect to communicate via a serial port. This means that some third-party applications that are compatible with VAG-COM interfaces may not work with the default USB drivers. For example, some tuning software or ECU flashing tools may require a serial COM port to connect to the interface.
To solve this problem, Ross-Tech provides drivers that emulate a COM port for their USB interfaces. These drivers are called Vag 908 USB Driver 64 183 and they are compatible with Windows 2000 and newer. They should work with Windows 10 as well. However, these drivers are not supported by Ross-Tech and they should be used only by someone who is comfortable installing and uninstalling USB drivers on their PC.
How to Install Vag 908 USB Driver 64 183 on Windows 10?
To install the Vag 908 USB Driver 64 183 on Windows 10, you will need to download the driver file from the Ross-Tech website. The file name is vcpdrivers.zip and it contains the drivers for both 32-bit and 64-bit versions of Windows. You will also need to have your VAG-COM interface plugged into your computer.
Here are the steps to install the Vag 908 USB Driver 64 183 on Windows 10:
Unzip the contents of the vcpdrivers.zip file into a new folder on your computer.
Open Device Manager on your computer. You can do this by right-clicking on the Start menu and selecting Device Manager.
Find your VAG-COM interface in Device Manager. It should be under Ports (COM & LPT) or Universal Serial Bus controllers. The name should show something like "Ross-Tech Direct USB Interface".
Right-click on your interface and select Update Driver.
Select Browse my computer for driver software.
Select Let me pick from a list of available drivers on my computer.
Select Have Disk...
Browse to the folder where you unzipped the vcpdrivers.zip file and select the appropriate driver for your system. For example, if you have a HEX-USB interface and a 64-bit version of Windows, select HEX-USB+CAN_x64.inf.
Click OK and then Next.
Follow the instructions on the screen to complete the installation.
Once the installation is done, you should see a new device under Ports (COM & LPT) or Universal Serial Bus controllers with a name like "Ross-Tech Direct USB Interface (COMx) with VCP". The COMx number may vary depending on your system.
You can now use your VAG-COM interface with applications that require a serial COM port. However, you may need to change the COM Port Number depending on how high a number the application supports. To do this, follow these steps:
Open Device Manager again and find your interface under Ports (COM & LPT) or Universal Serial Bus controllers.
Right-click on your interface and select Properties.
Click on the Port Settings tab and then click on the Advanced button.
Select a lower COM Port Number from the drop-down menu. For example, COM3 or COM4.
Click OK and then OK again to close the windows.
You may need to restart your computer for the changes to take effect. You can now use your VAG-COM interface with applications that require a serial COM port. However, you should not use these applications at the same time as VAG-COM software, as this may cause conflicts or errors.
How to Uninstall Vag 908 USB Driver 64 183 on Windows 10?
If you want to uninstall the Vag 908 USB Driver 64 183 on Windows 10, you will need to follow these steps:
Open Device Manager again and find your interface under Ports (COM & LPT) or Universal Serial Bus controllers.
Right-click on your interface and select Uninstall Device.
Check the box that says Delete the driver software for this device and click Uninstall.
Disconnect your VAG-COM interface from your computer.
Delete the folder where you unzipped the vcpdrivers.zip file.
You have now uninstalled the Vag 908 USB Driver 64 183 on Windows 10. You can reinstall it anytime by following the installation steps above.
Conclusion
Vag 908 USB Driver 64 183 is a driver that emulates a serial COM port for Ross-Tech USB interfaces. It allows you to use your VAG-COM interface with applications that require a serial COM port, such as some tuning software or ECU flashing tools. However, it is not supported by Ross-Tech and it should be used only by someone who is comfortable installing and uninstalling USB drivers on their PC. You can install and uninstall the Vag 908 USB Driver 64 183 on Windows 10 by following the steps in this article. We hope this guide was helpful and informative for you. a27c54c0b2